Press For Champagne DIY

Hello all! 

For my first DIY project that I will be sharing with you guys, I thought I would make something fairly inexpensive & easy that could go in the home. I had the idea to make this “Press For Champagne” wall hanging after seeing a couple of similar ones on some decor websites, which all ranged from $90-$150. After thinking about it, I realized that I had a lot of supplies I could use to make something very close to it – if not practically the same. I only needed a few more items which could also be picked up at my local hardware store. I’m sure there are some similar tutorials already somewhere online, but here is my take on it. This project as a whole cost me less than $15 since I already had lots of the materials needed. 




  • Picture Frame
  • Spray Paint (Optional depending on colour preference.)
  • Door Bell (Base can be painted if necessary.)
  • Rhinestones or Stud Earrings
  • Hot Glue Gun
  • Printer 
  • Tape

First off I found an old frame which I already had, and decided that I wanted it to be gold. So I taped the glass (mine would not pop out) and waited for it to dry. 


After allowing the frame to dry & then taking the tape off of it, I measured the glass piece inside to see how big I needed to make the “Press For Champagne” paper insert that would be placed on the inside. 

Next, I used Microsoft Word to create a text box with dimensions just a tad bit larder than those on the glass piece of the frame. I then chose my font, typed it inside of the text box, & centered it. 

I used a ruler & x-acto knife on a cutting board to ensure my cuts were precise & even. After getting it cut to the correct size, I placed the paper inside the frame and taped the edges of it to ensure it stayed in the correct place.


 After closing the frame, I took the doorbell and instead of putting the screws in the bottom & top holes, I used a pair of rhinestone earrings that I no longer needed/wanted and hot glued them in the hole placements. You can also just use plain rhinestones. 


The last step was to then take the door bell and hot glue the back of it, I then gently placed it in the center of the glass on the front of the frame – and TA – DA! 


It’s as easy as that, minimal work and minimal costs (depending on where you purchase and what you need, make sure to always check the dollar store first!). 

Also if you prefer, you can also do one that says “Press For Wine”, “Press For Coffee”, etc. 

I hope you enjoyed this quick & girly DIY. It was lots of fun to make. 

Love always, 

Aleasha. Xo 


Posted in: DIY

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s